PULL UP!

PULL UP!

The new repair method
The PULL UP! repair system is the latest Spanesi innovation, which utilizes suction cups, glue and slide hammers to produce flawless panel repairs.

Suitable for both steel and aluminium substrates, straightening is performed from the exterior of the panel or lining.

Spanesi’s exclusive glue formulation facilitates difficult repair procedures to be completed on rocker panels, roofs, dog legs, door sills, along body lines and pillar locations.
Spanesi_PULL_UP_System

Convex suction cup

Available in different sizes.
ventosa_convessa

Angled suction cup

Available in different sizes.
ventosa_angolare

Round suction cup

Available in different sizes.
ventosa_tonda

Oval suction cup

Available in different sizes.
ventosa_ovale

Concave suction cup

Available in different sizes.
ventosa_concava

Rectangular suction cup

Available in different sizes.
ventosa_rettangolare_piatta

Steel cores

Suction cups are built with steel cores to guarantee strength and reliability during pulling.
anima_ventosa

Full

The repair solution for major and complex damage types. Up to 4 suction cups may be combined for simultaneous pulls in large repair areas. Can be used with the Electro puller (optional).
5 Slide hammers
120 Shaped suction cups
65 Thread pivots
8 Double combination bars
4 Triple combination bars
3 Nylon hammers
2 Polycarbonate trowels
3 Nylon wedges
1 Nylon cone
1 450W Hot glue gun
5 Kg d.15 hot glue
Spanesi_PULL_UP_Full

Standard

The repair solution for small to moderate damage types. Up to 2 suction cups may be combined for simultaneous pulls. Can be used with the Electro puller system (optional).
5 Slide hammers
60 Shaped suction cups
32 Thread pivots
4 Double combination bars
3 Nylon hammers
2 Polycarbonate trowels
3 Nylon wedges
1 Nylon cone
1 450W Hot glue gun
5 Kg d.15 hot glue
Spanesi_PULL_UP_Standard
Focus points

1

CYCLE TIME AND COST REDUCTION

Increased touch times.
Decreased parts ordering.
Faster vehicle repairs.

2

EFFICIENT

Repair panels without removing paint from panel surfaces and instantly checking the end result.

3

CONVENIENT

No need to disassemble the vehicle, disconnect the battery, reset and calibrate Advanced Driver Assistance Systems (ADAS).

4

EASY TO COMPLEX DAMAGE TYPES

Suction cups comprised of multiple shapes and sizes can be combined to address the most difficult repair scenarios.

5

FEWER PARTS TO REPLACE

Restore the original panel’s shape and appearance without intrusive part replacements.

6

MINIMIZE WELDING

Repairs are accomplished in a noninvasive approach, decreasing the opportunity for panels to altered by the introduction of heat, burnthrough and compromised corrosion protection.

7

FULL PULLING FORCE AND CONTROL

Straighten using a combination of pull bars and our Electro puller (optional).

Pulling with slide hammer

Spanesi_PULLUP_2

Pulling with slide hammer

Spanesi_PULLUP

Pulling with slide hammer

Spanesi_PULLUP_4

Pulling with slide hammer

Spanesi_PULLUP_8

Pulling with Electro Puller

Spanesi_PULLUP_7

Pulling with Electro Puller

Spanesi_PULLUP_5

Pulling with Electro Puller

Spanesi_PULLUP_3

Pulling with Electro Puller

Spanesi_PULLUP_6

Get it now